Iidiski ze-Z-LION Diamond Flap zokuThayila Izixhobo zokuGqibezela iithayile zeLamellar
Iidiski ze-Z-LION Diamond flap zokufaka iithayile zisetyenziselwa ukubumba, ukuvala umva, ukujija, ukurhangqa nokunye okuninzi kwiithayile ze-ceramic, ze-porcelain kunye nee-slabs. Zikwasebenza kakuhle kwi-granite, imabula, i-quartz, ilitye elisinkiweyo, ikhonkrithi, njl. Uyilo lwe-lamellar lokugaya nokulungisa ngokukhawuleza. Iiflaps zedayimani eziguquguqukayo zonyusa ukuthamba kwediski, ipateni yomphezulu we-mesh inika ubomi obungcono besixhobo, i-fiberglass backing ekhaphukhaphu ene-16mm okanye i-22.23mm arbor hole.
Iimpawu zeediski ze-Z-LION Diamond flap zokuthayila zezi zilandelayo:
• Umthamo okhethekileyo wokususa izinto, susa imiphetho ebukhali kwiithayile ngokufanelekileyo.
• Ngenxa yokuguquguquka kwayo, ikwafanelekile nakwikona yemitya yobungcali.
• Ngomngxuma we-arbor we-16mm okanye we-22.23mm, kulula ukuyisebenzisa kuyo nayiphi na i-engile grinder eqhelekileyo.
• Ubunzima obuphantsi, obulungeleleneyo ngokugqibeleleyo, ukungcangcazela okuncinci, ingxolo encinci.
• Iiflephu zedayimani eziguquguqukayo zibonelela ngokuthamba nokuchukumisa okuthambileyo.
• Ipateni yomphezulu we-mesh iqinisekisa ubomi besixhobo obude kunye nenqanaba elihle lokugqitywa.
Ubukhulu obudumileyo yi-4", 4.5" kunye ne-5".
Iigrits ezidumileyo zezi 60# 120# 200# 400# (600# 800# 1500# 3000# zingenziwa xa ziceliwe.)
Iza neeflephu eziguquguqukayo kwipateni ye-mesh.
Iza ne-fiberglass ekhaphukhaphu engasemva ene-16mm okanye i-22.23mm arbor hole.
| Igama lemveliso: | Iidiski zedayimani zokuthayela |
| Inombolo yento: | I-ZL-WMC66 |
| Uphawu: | Ingonyama ye-Z |
| Umphezulu wokusebenza: | Ishidi ledayimani eliguquguqukayo elenziwe nge-electroplated |
| Iimpawu zemveliso: | • Umthamo okhethekileyo wokususa izinto, susa imiphetho ebukhali kwiithayile ngokufanelekileyo. • Ngenxa yokuguquguquka kwayo, ikwafanelekile nakwikona yemitya yobungcali. • Ngomngxuma we-arbor we-16mm okanye we-22.23mm, kulula ukuyisebenzisa kuyo nayiphi na i-engile grinder eqhelekileyo. • Ubunzima obuphantsi, obulungeleleneyo ngokugqibeleleyo, ukungcangcazela okuncinci, ingxolo encinci. • Iiflephu zedayimani eziguquguqukayo zibonelela ngokuthamba nokuchukumisa okuthambileyo. • Ipateni yomphezulu we-mesh iqinisekisa ubomi besixhobo obude kunye nenqanaba elihle lokugqitywa. |
| Ubungakanani obufumanekayo: | 4", 4.5", 5" |
| Iigrits ezidumileyo: | 60# 120# 200# 400# |
| Iigrits ezikhoyo: | 60# 120# 200# 400# 600# 1000# 2000# 3000# |
| Iiflaps: | Iiflephu eziguquguqukayo kwipateni ye-mesh |
| Isiseko: | Isiseko sefayibha esine-arbor hole eyi-16mm okanye eyi-22.23mm |
| Ukusetyenziswa: | Imanzi kwaye yomile |
| Umatshini osetyenzisiweyo: | Ii-Angle grinders |
| Izicelo: | Ukwakha, ukuvala i-back mitring, ukwenza i-bevelling, ukwenza i-rounding nokunye okuninzi kwiithayile ze-ceramic, i-porcelain kunye ne-slabs. Kukwasebenza kakuhle kwi-granite, imabula, i-quartz, ilitye elitshisiweyo, ikhonkrithi, njl. |
