Ama-Z-LION V20 Full Bullnose Diamond Hand Polishing Pads enziwe ngamatshe nokwakha
I-V20 efakwe ngogesiamaphedi okupholisha izandla edayimaneZenzelwe iphrofayili engu-V yokugaya nokupholisha imiphetho enephrofayili engu-20mm egcwele i-bullnose. Zilungele i-granite, imabula, i-silestone, i-dekton, ikhonkrithi, i-terrazzo, ithayela nezinye izinto zamatshe nezokwakha. Zilungele kokubili ukwenza izinto zokulungisa kanye nokwenza ngokwakho.
Indawo yokusebenza yephedi yokupholisha ngesandla ye-V20 iyisiqeshana seshidi eliguquguqukayo ledayimane elifakwe ngogesi elinokuvezwa kwedayimane okungu-100% futhi lisebenzisa ubuchwepheshe be-electroplating ukubamba idayimane ngayinye endaweni yayo. Indawo yokusebenza yeshidi eliguquguqukayo ledayimane ithambile njengephepha le-sandpaper elivamile kodwa lisebenza ngesivinini esikhulu futhi lihlala isikhathi eside kakhulu. Ukubekwa kwedayimane kuphethini yesikwele elinokususwa okungcono kwe-swarf kanye nokushabalalisa ukushisa, kuhle kakhulu ekusindeni amatshe, ukhonkolo nezinye izinto zokwakha.
Ngaphandle kwezinzuzo ezingenhla ezivela endaweni yayo yokusebenza eguquguqukayo efakwe ngogesi, ama-pads okupholisha ngesandla edayimane e-Z-LION 37CV20 asenezici ezilandelayo:
• Yakhelwe iphrofayili engu-V ukuze kube nemiphetho yempumulo egcwele engu-20mm.
• I-foam back ethambile nelula iyasiza ekuqedeni ukukhathala ngesikhathi sokuyisebenzisa.
• Imigoqo yeminwe ohlangothini lwefoam emuva ukuze kube lula ukuyibamba.
• Ukumelana nokushisa okuphezulu ngenxa yokushabalalisa ukushisa okuphezulu.
• Ingasetshenziswa yomile futhi imanzi.
Usayizi: V20 iphrofayili
Ama-grits athandwayo: 60# 120# 200# 400# (ama-grit amakhulu angu-30# kanye nama-grits amahle angu-600# 800# 1500# 3000# angenziwa ngokwesicelo).
Ifoam enemibala emuva ukuze kube lula ukubona ama-grits. Oluhlaza okotshani ku-60#, omnyama ku-120#, obomvu ku-200# kanye nophuzi ku-400#.
Indawo yokusebenza egoqekile ngogesi eguquguqukayo ngephethini yesikwele.
I-foam eyisicaba ibuyile ngendlela ehlelekile.
| Igama Lomkhiqizo: | Amaphedi okupholisha ngesandla edayimane afakwe ngogesi e-V20 |
| Inombolo Yento: | I-ZL-37CV20 |
| Umkhiqizo: | Ingonyama i-Z |
| Indawo yokusebenza: | Ishidi ledayimane eliguquguqukayo elenziwe ngogesi |
| Izinzuzo zendawo yokusebenza: | •Ithambile njengephepha lokusila elivamile kodwa ihlala isikhathi eside kakhulu. •Ukubekwa kwedayimane okunembile ukuze kususwe ama-swarf amahle kakhulu futhi kushabalale ukushisa. •Ukuchayeka kwedayimane okungu-100% kusebenza ngamandla kusukela ekuqaleni kuze kube sekupheleni. •Idayimane ngalinye ligcinwa endaweni yalo ngobuchwepheshe be-electroplating, okuqinisekisa ukuqina okuhlala isikhathi eside. |
| Izici zomkhiqizo: | • Yakhelwe iphrofayili engu-V ukuze kube nemiphetho yempumulo egcwele engu-20mm. • I-foam back ethambile nelula iyasiza ekuqedeni ukukhathala ngesikhathi sokuyisebenzisa. • Imigoqo yeminwe ohlangothini lwefoam emuva ukuze kube lula ukuyibamba. • Ukumelana nokushisa okuphezulu ngenxa yokushabalalisa ukushisa okuphezulu. • Ingasetshenziswa yomile futhi imanzi. |
| usayizi: | Iphrofayili ye-V20 |
| Ama-grits adumile: | 60# 120# 200# 400# |
| Ama-grits atholakalayo: | 30# 60# 120# 200# 400# 600# 1000# 2000# 3000# |
| Ukusetshenziswa: | Kumanzi futhi komile |
| Umshini osetshenzisiwe: | Ukupholisha izandla ngaphandle komshini |
| Izicelo: | Ukuze kupholishwe endaweni, kutholakale imihuzuko kanye neminye imisebenzi yokupholishwa ngesandla, ukuze kusetshenziswe imiphetho yempumulo egcwele engu-20mm. |
